Products

Norski 2:1 Hi Strength Adhesive

Our 2:1 High Strength Adhesive will create a non-flexible bond and hold over 200Kg's of force. Cream in colour when mixed with the correct amount of hardener, this prod...

Norski 4 to 1 Epoxy Resin

Norski 4 to1 Epoxy Resin is one of our flagship products that has a multitude of uses. Normally used in conjunction with our Norski Glass Cloth for laminating, this epoxy resin ...

Norski 5 Minute Epoxy Adhesive

Our 5 Minute Epoxy product sets crystal clear and bonds virtually any substance to either itself or dis-similar material in under 5 minutes, Timber, steel, ceramics, most plastics, are no problem E...

Norski Acetone

Norski Acetone is used for the clean up of polyester based products or tools that are used in the application of polyester based products such as brushes or rollers.

VIEW NOW

Norski Chopped Strand Mat Pack 300gm

Specifically designed for use with our Norski Polyester Resin, this is 1 square meter of 300 gram per square meter of matting.

300 GSM (Grams per square meter) is our most flexible mattin...

Norski Chopped Strand Mat Pack 450gm

Specifically designed for use with our Norski Polyester Resin, this is 1 square meter of 450 gram per square meter of matting.

450 GSM (Grams per square meter) is still relatively flexibl...

Norski Chopped Strand Mat Pack 600gm

Specifically designed for use with our Norski Polyester Resin, this is 1 square meter of 600 gram per square meter of matting.

600 GSM (Grams per square meter) is not fle...

Norski Colour Pigment Pastes

Our 8 tints contain pigment which is similar to that held in the paint tint dispensers in paint stores. Pigment can be added up to a ratio of 5%. However, 2.5% is regularly...

Norski Dyes

When dyes are added to our resin products, the resin changes that colour but you can still see light through the resin. Adding more dye will darken the colour to the point ...

Norski Epoxy Carborundum

Epoxy Carborundum is an epoxy based filler with the inclusion of ‘carborundum chips’,  which means this product, when mixed correctly with it's supplied hardener is resistant to continual slidin...

Norski Epoxy Doming Resin

Our Doming Resin is one of our more popular products, otherwise known around the world as 'Liquid Glass'. This resin can be used to create the appearance of an article being wrapped in glass. We...

Norski Epoxy Knot Fill Resin

We developed Norski Knot Fill resin specifically for use for filling floor or table knots and imperfections where a super hard result is required. Appearing almost clear, this epoxy solution is ...

Norski Epoxy Mortar (Mixed by 1:1)

his is our Epoxy Mortar product which is typically used as a concrete glue. As with all of our epoxy products it offers enormous strength and its best holding power is achieved ...

Norski Epoxy Mortar (Mixed by 2:1)

This is our Epoxy Mortar product which is typically used as a concrete glue. As with all of our epoxy products it offers enormous strength and it's best holding power is achieve...

Norski Epoxy Thinners/Clean Up Solution

Our Epoxy Thinners is better named 'Epoxy Clean Up Solution', so we added to the name of the product. Used when you spill a bit of epoxy resin based glue, filler or in fact any epoxy based produ...

Norski Epoxy Timber Sealer

Our Norski Epoxy Timber Sealer is a two-part penetrating solution which is your 'go to' for rotten or degraded timber. This product is full of solvent which allows the 1:1 mixed solution to soak...

Norski Flowcoat White

Polyester Flowcoat is the product that is used to do repairs to Gelcoat produced surfaces.

This product is 'White' in colour and can be painted over with any paint system that uses a prim...

Norski Glass Cloth

Our 200 GSM Glass Cloth is supplied in 1 Square Meter packs and for those larger jobs, we have 2 square meter packs available. We will even sell you a larger length off our...

Norski Kleer Kast Resin

Kleer Kast is our clear resin product typically for use with a mould and is normally used for smaller work. This polyester product is amazingly clear in it's natural state and capable of accepti...

Norski Mica Powder

Mica Powder offers a metallic appearance to the resin when added, 20 grams is enough to colour between 1 and 3 Litres of resin depending on the depth of colour result you a...

Norski Mould Release Wax

Mould release wax is the answer for getting your products out of the mould, this is what the professionals use.

Based on the same principle as ...

Norski Natural Epoxy Filler

Our Natural Tintable Epoxy Filler is the only tintable filler on the New Zealand market. So not only is this the hardest filler known to man, it can be tinted with our tints/pig...

Norski N°1 Fibreglass Repair Kit

The ingredients of this kit are as follows:-

250ml Polyester Resin, Chopped Strand Matt (140mm x 1M), Brush, Mixing Sticks, Sandpaper and Instructions.

Everything that you need to ...

Norski N°2 Fibreglass Repair Kit

This is the larger of our two Polyester Fibreglass Repair Kits and contains:-

500ml Polyester Resin, Chopped Strand Matt, Brush (for resin application), 2 x Mixing Sticks, Cleaning Fluid ...

Norski N°3 Gelcoat Repair Kit

This kit contains:-

125ml waxed Gelcoat, Mixing Sticks, Sandpaper and Instructions.

Great for touch ups or small repair jobs to any polyester fibreglass item.

Campervan,...

Norski N°4 Surfboard Repair Kit

A kit that contains all you need for carrying out repairs to your surfboard.

Our Surfboard Resin is a clear coat for use wit...

Norski Polyester Resin

Our Polyester Resin is specifically designed for use with Norski Chopped Strand Mat and is typically used for making repairs to items that were originally manufactured using pol...

Norski Polyurethane Varnish (Gloss)

Norski Polyurethane Varnish (Gloss) is an oil-based single part product that is a fantastic finish for natural timber. Offering great weatherproof qualities, our varnish is rated as ‘marine grad...

Norski Polyurethane Varnish (Satin)

Norski Polyurethane Varnish (Satin) is an oil-based single part product that is a fantastic finish for natural timber. Offering great weatherproof qualities, our varnish is rated as ‘marine grad...

Norski Pour In Foam

Our Pour In Foam is a liquid version of what is in the cans of expanding foam that are gas charged.

Rated at 90% closed cell/10% open cell, it's very slow to take on water

Once mix...

Norski PVA Release Agent

For those that want to go to the absolute limit with their moulds, you may need to apply a layer of PVA Release Agent.

This product is really q...

Norski Silica Sand

One kilogram bags of sand, supplied in either ‘fine’ or ‘coarse’ variants for adding to any substrate to create a non-skid finish.

Norski Surfboard Resin

Our Surfboard Resin is a clear coat for use with surfboards that have a PU (polyurethane) foam blank. This is typically denoted by a wooden stringer running through the board from tip to tail. E...

Norski White Epoxy Filler

Available in a range of sizes our White Epoxy Filler is a 2:1 mixed product that when cured is the ...